Chapter 19 - Wings - Part 18

Last week and yesterday I finnished installing the wing root aileron hardware.

Pictured here is the infinity spherical bearing prior to bonding the click bond fasteners (seen bolted to the bearing houseing). I did make sure to sand the fiberglass and clickbond surfaces prior to flox and glass.

Pictured here is all of the wing root aileron hardware installed except for the pushrod and rod end bearings between the bellcranks.

Also yesterday I layed up the two plies of bid glass to close out the aileron ends. Today I cleaned up the edges and reinstalled the aileron.

With the left wing aileron work complete for now, I turned my attention to the right wing. Pictured here is the right wing aileron liberated from the wing.